PRE-RUNNER™ T-Shirt Sample Press

Click on picture to view larger

PRE-RUNNER™ T-Shirt Sample Press

  Pre-Runner™ is M&R’s semi-automatic T-shirt sample press. It’s available in standard and oversize (OS) versions with respective maximum image areas of 66 x 71 cm (26” x 28”) and...

in stock

← Previous Product Next Product →

 

Pre-Runner™ is M&R’s semi-automatic T-shirt sample press. It’s available in standard and oversize (OS) versions with respective maximum image areas of 66 x 71 cm (26” x 28”) and 112 x 97 cm (44” x 38”). Both sizes come in single-pallet and optional triple-pallet configurations. When combined with M&R’s Tri-Loc® Rapid Registration System, the triple-pallet index system turns Pre-Runner into the perfect T-shirt sample press. A Tri-Loc pallet is mounted in the center station to provide for screen registration. Conventional pallets are mounted in the other two stations for test screen printing and/or screen printing production runs. Because its printhead is styled after those used on automatic screen printing presses, Pre-Runner enables operators to refine and document automatic-press print parameters in a way that’s simply not possible on a manual screen printing press.

Not only does Pre-Runner reduce the need to take production screen printing presses offline for sampling, it requires less space than the average manual screen printing press. Pre-Runner’s controls enable operators to run the press under numerous print scenarios, and there is no limit to the number of colors that can be quickly registered and test-printed. Pre-Runner can also be used to screen print shirt pockets, cut piece goods, full-size single-color prints, and other textile substrates.

Designed for precise registration, Pre-Runner’s head-lift system was derived from the components and design elements of M&R’s Saturn Platinum graphic screen printing press. Pre-Runner also features an AC variable frequency electric-drive printhead, adjustable front and rear stroke length, squeegee air pressure regulator, front & rear micro-registration, and pneumatic squeegee/floodbar and frame clamps. When it comes to screen print sampling and test printing, nothing comes close to M&R’s Pre-Runner T-shirt sample press.

STANDARD FEATURES

CERTIFICATION

  • CE Certified: Built to specifications established by the European Committee for Standardization® (CE)
  • UL Listed: Built to specifications established by Underwriters Laboratories® (UL)
CONTROL CENTER
  • Jog-left/jog-right controls
  • Multiple print stroke capability (1-2 on single-pallet models and 1-9 on three-pallet models)
  • Onboard self-diagnostics
INDEX SYSTEM
  • Servo drive combines higher screen printing press speeds with exceptional smoothness, consistency, and longevity
PALLET SYSTEM
  • Superior three-point pallet leveling system
  • Tool-free quick release pallet clamps
PRINTHEADS
  • Brushless and maintenance-free electric-drive motor delivers smooth screen print strokes and exceptional control
  • Four-point off-contact adjustment
  • Independent print/flood speed controls on each printhead simplify screen printing press setup
REGISTRATION
  • Compatible with M&R’s Tri-Loc® Rapid Registration System
  • Enhanced front micro-registration adjustments with visual guides
  • Locking rear micro-registration
SCREEN CLAMPS & HOLDERS
  • Adjustable screen holders accommodate a wide variety of screen sizes
  • Clamping system holds roller frames without special adapters
  • Flip-up front screen holders speed setup
  • Pneumatic clamps hold frames tight and allow rapid screen loading
SQUEEGEE/FLOODBAR
  • Angle and calibrated pressure adjustments are independently set
  • Digital squeegee/floodbar speed display
  • Front or rear print carriage stop position allows operator to leave screens clear or flooded (great for water-based inks)
  • Independent squeegee & floodbar speed adjustments
  • Pneumatic squeegee/floodbar clamps with tool-free angle adjustment
  • Squeegee air regulator with a pressure gauge at the end of the printhead
  • Visual reference marks every 5 degrees simplify squeegee/floodbar angle adjustments
WARRANTY, SERVICE AND SUPPORT
  • 24-hour hotline is staffed 365 days a year
  • Access to M&R’s Training Center
  • Parts & supplies are available online at store.mrprint.com
  • Two-year limited warranty 

          Model Specification

          Air @ 6,9 bar (100 psi) 28 l/min (1 cfm)
          Electrical Requirements 208/230 V, 1 ph, 14 A, 50/60 Hz, 1.7 kW
          208/230 V, 3 ph, 9 A, 50/60 Hz, 1.7 kW
          Maximum Frame Size 132 x 132 x 5 cm (52” x 52” x 2”)
          Maximum Image Area 112 x 97 cm (44” x 38”)
          Overall Size (W x D x H) 112 x 218 x 157 cm (44” x 86” x 62”)
          Shipping Weight 608 kg (1340 lb)
          Standard Pallet Size 112 x 97 cm (44” x 38”)

          Click here to download Product Brochure

          Maecenas convallis diam quis ex laoreet luctus. Duis ullamcorper iaculis lorem, at tincidunt metus maximus eu. Proin sit amet blandit mi, vel ornare libero. Nullam massa nunc.
          Maecenas convallis diam quis ex laoreet luctus. Duis ullamcorper iaculis lorem, at tincidunt metus maximus eu. Proin sit amet blandit mi, vel ornare libero. Nullam massa nunc.