Binders are the glues that bond the pigments to the fabric. There are a variety available that exhibit different properties. Straight acrylic binders are usually less expensive but may not impart as soft a hand as those blended such as styrene acrylic or acrylanitrile....

Conc JTS is a premium thickening agent. Needs high speed homogenization to completely shear product and optimize thickening. Recommended use is approximately 3-4% by weight. Disclaimer: Auxiliary additives are not always needed in a print paste formula. Please test your particular fabric type for...

Jantex Discharge Base JT1  is used in a system to strip dyed ground shades and simultaneously replace them with a pigment color if desired.  It is available in a standard base form.  Prepare your print paste by adding the pigment concentrate to the discharge...

Jantex Lube JT is a humectant designed to improve run-ability in waterbase inks. Jantex lube JT will help keep waterbase inks from drying in screens and also allow the ink to more easily pass through the mesh.  Be sure to test wash and crock...

Jantex Parolite (also known as activator or ZFS) is used in discharge systems for printing onto dark garments. Jantex Parolite is designed for use on 100% cotton and some cotton blend fabrics. Once Parolite has been added to the discharge base, it has a...

Jantex RFU Extender is a premium base designed for waterbase pigment concentrates.  Jantex RFU Extender yields a soft hand and low crock and is designed to run well in both auto and manual presses.  It is ideal for use on light ground cottons, 50/50...

Jantex Softener JT3 can be added to a base to improve hand and increase the softness in waterbase prints. Jantex Softener JV3 is designed for compatibility and can be used in ready to use water base inks and discharge base. Jantex Softener JT3 can...