JANTEX PEARL GOLD JT
25 in stock
DESCRIPTION JANTEX PEARL GOLD JT and JANTEX PEARL SATIN JT are ready for use pearlescent bases. They will give a bright, clean, gold or satin finish to a textile print.
APPLICATION Pearl bases can be used straight from the container to achieve a satin or gold finish. Numerous additional colors can be achieved by adding no more than 0.5 to 5% of JANTEX PIGMENT CONCENTRATES to either base. The gold pearl gives a wide range of earth tone colors while the satin pearl gives a wide range of pastel colors.
SUBSTRATES/ Cotton, cotton-poly blends, cotton-rayon blends, some 100%
SCREEN MESH: polyester and Lycra blends. Knit or woven fabric construction.
TEST PRIOR TO ANY USE. Verify wash fastness to meet your customer requirements 24 to 60 monofilament polyester.
STENCIL Water resistant emulsion or capillary films must be used or stencil breakdown will occur. It is recommended that screens be left in flooded state during pauses in printing.
MODIFIERS To aid in the prevention of drying in the screen, a humectant type modifier, such as JANTEX LUBE JT, can be added up to approximately 5%.
CURING 300 to 320 degrees for 3 minutes for maximum wash fastness and crock fastness.
CLEAN-UP Clean up with water or light soapy water. Rinse well.
PROPERTIES Semi-liquid paste with fine colored flakes in suspension.
STORAGE Keep from freezing and away from direct sunlight. Store between 55 to 85 degrees F. Keep lid on when not in use. Keep out of reach of children.
SAFETY Always wear protective eye wear and clothing when mixing color. Refer to Material Safety Data Sheets for additional information.