JANTEX PUFF JT
25 in stock
DESCRIPTION Jantex Puff JT yields a three dimensional effect on the fabrics printed. These products are ready for use and deliver bright shades when used with Pigment Concentrates.
APPLICATION Jantex Puff JT and Jantex Puff Super JT offer excellent runability in manual and automatic print machines. Both products yield excellent crockfastness and washfastness.
PERFORMANCE No more than 8% Jantex Pigment Concentrate should be blended with Jantex Puff JT for printing expanded colors on textiles. Test for desired rise prior to production.
SCREEN MESH 40 to 125 Monofilament polyester.
STENCIL Water resistant emulsion or capillary films must be used or stencil breakdown will occur. It is recommended that screens be left in flooded state during pauses in printing.
MODIFIERS Reducer – Reduce with water by no more than 5% . Tinting – Use Jantex White JT Tint or Jantex Badger White for tinting and brightening.
CURING Maximum expansion is achieved at 1 ½ minutes at 275° F. Maximum washability is achieved at 300° F for 3 minutes. Curing may vary depending on drying equipment used. Results can depend on substrate and application. Always test prior to production.
CLEAN UP Cleans up with water.
PROPERTIES Off – white paste.
STORAGE Keep from freezing and away from direct sunlight. Store between 55° to 95° F. Keep lid on when not in use. Keep out of reach of children.
SAFETY Always wear protective eyewear and clothing when mixing color. Refer to Material Safety Data Sheets for additional information.