VITRAN II™ UV Screen Printing Conveyor Dryer
Switchback™ and Vitran II™ are the finest UV cure systems available. M&R’s dual-reflector technology delivers faster curing, lower energy costs, and cooler operation. Each system uses a secondary reflector—positioned at the top of the primary reflector—to capture the energy that normally bounces down onto the lamp. The secondary reflector redirects this UV energy onto the substrate, speeding the curing process while saving energy and prolonging lamp life. Open-top reflector chambers allow heat and ozone to escape. Powerful turbines hold down even lightweight substrates while drawing cool air under the reflector and across the belt and lamps. Adjustable UV lamps can be focused to cure heat-sensitive substrates (like vinyl) or unfocused for heavier substrates (like glass or metal).
M&R’s SystemSaver™ automatic shutdown sequence keeps the blower and belt running until the chamber has cooled. Hinged housings provide easy access to lamps, and a moveable control cabinet simplifies maintenance. Both systems are driven by reliable, heavy-duty, variable-speed DC electric motors. Large crowned anodized aluminum rollers provide positive belt tracking. Switchback features a temperature controller with digital display, digital elapsed-time meter to monitor lamp life, a digital amp meter, and digital belt-speed readout. Vitran II employs a touch screen control panel to access lamp settings, timers, maintenance reminders, programming, and system status messages.
Vitran II is available in eight standard belt widths, from 61 cm (24") to 213 cm (84"). Every model offers the choice of 118 watts/cm (300 watts/in) or 157 watts/cm (400 watts/in) maximum power settings—in single and double lamp versions. Vitran II-300 can be set at 49, 79, 98, or 118 watts/cm (125, 200, 250, or 300 watts/in). Vitran II-400 can be set at 63, 79, 118, and 157 watts/cm (160, 200, 300, and 400 watts/in). Switchback is infinitely adjustable from 63 to 157 watts/cm (160 to 400 watts/in), and accepts three types of UV lamps—Ferric/Iron Oxide, Gallium, and Mercury Vapor (standard)—allowing operators to select the optimal curing source and intensity for even the most difficult ink/substrate combinations. Switchback’s optional dual-lamp system enables operators to keep a different lamp in each reflector. When successive jobs require a different UV source but only one lamp, operators can simply activate the appropriate lamp. The ability to easily select the right lamp and to fine-tune wattage enables the dual-lamp Switchback to provide the optimal cure at the fastest possible speeds.
AIR HANDLINGCERTIFICATION CONTROL CENTER CONVEYOR SYSTEM CURE SYSTEM DESIGN & CONSTRUCTION WARRANTY, SERVICE AND SUPPORT
|Belt Length||305 cm (10’)|
|Electrical Requirements @ 118 watts/cm (300 watts/in)||208/230 V, 1 ph, 51/48 A, 50/60 Hz, 11 kW
208/230 V, 3 ph, 49/45 A, 50/60 Hz, 10.5 kW
400 V, 3 ph, 30 A, 50 Hz,
460 V, 3 ph, 23 A, 50/60 Hz, 10.5 kW
|Electrical Requirements @ 157 watts/cm (400 watts/in)||208/230 V, 1 ph, 65/61 A, 50/60 Hz, 14 kW
208/230 V, 3 ph, 61/58 A, 50/60 Hz, 13 kW
400 V, 3 ph, 36 A, 50 Hz,
460 V, 3 ph, 28 A, 50/60 Hz, 13 kW
|Lamp & Belt Width||61 cm (24”)|
|Shipping Weight||635 kg (1400 lb)|